4A-DG Molecular Sieve

Home » Products » Molecular Sieve » 4A Molecular Sieve » 4A-DG Molecular Sieve
4A-DG Molecular Sieve


4A-DG molecular sieve is mainly suitable for deep dehydration dry of natural gas, high strength of which can fully guarantee its service life. Also, it can absorb moisture in natural gas, a small amount of carbon dioxide, hydrogen sulfide and other trace impurities. Especially natural gas with low content of carbon dioxide and hydrogen sulfide of less than 200 ppm should be gone through adsorption treatment by our DG molecular sieve and then be directly piped.

Technical Specification 4*8 Mesh 1/16” 1/8”
Nominal Pore Diameter 4 Angstroms 4 Angstroms 4 Angstroms
Bulk Density 0.66+/-0.04 0.65+/-0.03 0.65+/-0.03
Heat of Adsorption (Max) 1800 btu/lb H2O 1800 btu/lb H2O 1800 btu/lb H2O
Particle Diameter 4.2mm 1.6mm 3.2mm
Crush Strength > 100N > 35N > 80N
Attrition Rate < 0.3 %wt < 0.25 %wt < 0.3 %wt
Equilibrium H2O Capacity** > 21.5% wt > 21.5% wt > 21.5% wt
Water Content < 1.5% wt < 1.5% wt < 1.5% wt

As an experienced 4A-DG molecular sieve manufacturer and supplier in China, at Running Engineering we also provide 5A Molecular Sieve, air brake system molsieve adsorbent, compressed air drying activated alumina, and more.

Related Products
Other Products
    1. 4A Normal Molecular Sieve4A normal molecular sieve can be used for deep water removing and drying of gases and liquids such as air, natural gas, alkane, freezing medium, organic solvent and more. Besides, it is applicable to purification of argon, moisture removal in paints, dyes and coatings industry ...
    1. 5A Molecular Sieve5A molecular sieve is calcium and sodium type silica aluminates with crystal pore diameter of 5 angstroms or 0.5 nm. It is widely used in air purification system for removal of impurities such as water, carbon dioxide, acetylene and so on. Also, we apply our product to purification, dryness and separation of inert gas ...